HVAC money is earned in short bursts and lost in slow ones. The earning part is fast: a failed compressor swapped, a furnace repaired, a new system installed and the customer ready to pay. The losing part is slow: the invoice that goes out three days late, the parts receipt that never leaves the van, the maintenance agreement that nobody re-bills, and the paper pile on the accountant desk at tax time. None of the three tools here is HVAC software. They are general accounting tools, judged on fast-paid job invoices, parts on the bill, recurring invoices for maintenance agreements, receipts and the tax-time handover.
Quick verdict
- Best when unpaid invoices are the leak: FreshBooks Plus. Reminders, scheduled late fees and recurring invoices run on every plan, and Plus at $43 a month lifts the client cap to 50 and adds bank reconciliation, double-entry reports and accountant access.
- Best when the books are the whole job: QuickBooks Online. Full double-entry books run from the first day on every plan, and accountant access is included from Simple Start at $38 a month.
- Best when the budget is zero: Wave Starter. Free, with unlimited invoices and bookkeeping, but only in the United States or Canada, and automatic reminders wait for Pro at $19 a month.
What HVAC accounting actually demands
An HVAC job produces money in four places, and each one can leak. The first is the repair itself: labour and the call-out charge. The second is the parts and materials, from a capacitor to a compressor, and each part has a cost that has to land on the invoice or it comes out of the tech pocket. The third is the install job: a full system replacement with equipment costs, labour, parts and permits on one bill, where one missing line can wipe out the margin. The fourth is the repeat work: the seasonal maintenance agreement and the spring and autumn checks, billed on a timetable, not remembered. When any of the four slips, the job still gets done and the money still leaks, job after job.
Then there is the chasing. An HVAC repair invoice is usually a few hundred dollars, and a small unpaid invoice is easy to leave sitting. The customer is not refusing to pay, the invoice simply went out late, and the balance drifts into weeks. Across a year of repair calls those drifting balances add up to real money, and the summer rush makes it worse, because invoicing gets pushed aside. That is why the chasing tools matter as much as the invoice itself: automated reminders, late fees that put a cost on late payment, and recurring invoices that bill the maintenance agreements without anyone having to remember them. The last demand is the handover: receipts matched to their jobs, the bank account reconciled against the invoices, equipment costs tracked against each install, and profit shown by job. A system install that looks profitable on the invoice and loses money on the equipment is a loss the books have to catch.
The three tools at a glance
| Tool | Entry price | What carries the HVAC bill | Card fee and bank fee |
|---|---|---|---|
| FreshBooks | Lite, $23 a month for 5 billable clients (about $20.70 billed yearly) | Unlimited invoices, reminders, late fees and recurring invoices on every plan. Bank reconciliation, double-entry reports and accountant access from Plus | Cards 2.9 percent plus 30 cents, bank payments 1 percent |
| QuickBooks Online | Simple Start, $38 a month for 1 user | Unlimited invoices and clients, full double-entry books from the first day, accountant access from Simple Start, project profitability and inventory on Plus | Cards 2.99 percent, bank payments 1 percent with a 1 dollar minimum |
| Wave | Starter, free, with unlimited invoices, estimates, bills and bookkeeping records | Free bookkeeping with no published cap on clients or invoices. Automatic reminders wait for Pro at $19 a month, and no automatic late fee feature exists | Cards 2.9 percent plus 60 cents, bank payments 1 percent with a 1 dollar minimum |
FreshBooks: the chasing machinery, priced per client
FreshBooks takes the position that the invoice is the product. It is accounting-led invoicing, built around getting an invoice out, getting it paid, and chasing it when it is late. In a trade where the unpaid balance is usually small and easy to leave sitting, that chasing machinery is the argument. Automated reminders, scheduled late fees and recurring invoices come on every plan, including Lite. An estimate converts into an invoice without retyping, with materials and labour shown as separate lines, so parts, equipment and labour sit on one bill the customer can read.
The tiers are priced by billable clients: Lite at $23 a month covers 5 billable clients, or about $20.70 a month billed yearly, Plus at $43 a month covers 50 billable clients, or about $38.70 a month billed yearly, and Premium at $70 a month removes the cap entirely. Invoices are unlimited on every plan, so the limit that matters is the client list. An HVAC business bills dozens of households in a month, so the Lite ceiling of 5 arrives in the first week. That makes Plus, not Lite, the honest starting price for a working HVAC business. Plus also adds bank reconciliation, double-entry reports and accountant access, and automatic receipt data capture arrives from Plus upward, so a parts receipt photographed at the supply house becomes data, not paper in the van. Premium at $70 a month keeps all of that and adds project profitability reporting. Card payments cost 2.9 percent plus 30 cents per transaction, and bank payments cost 1 percent, on every plan alike. One catch is worth knowing: charging a card kept on file sits behind a paid payments add-on, so recurring invoices send themselves, but fully automatic charging costs extra, and the add-on price is not stated in the sibling drafts, so it is not budgeted here.
QuickBooks Online: the full books, priced around your team
QuickBooks Online takes the opposite position from FreshBooks. It is accounting software with invoicing built in, and the full double-entry books are there from the entry plan. For an HVAC business, that depth matters most at the two ends of the year: which jobs made money, and the year end handover. There is no cap on clients or invoices on any plan. The caps fall on the team instead.
The tiers are Simple Start at $38 a month for 1 user, Essentials at $85 a month for 3 users, Plus at $140 a month for 5 users, and the top plan at $340 a month for 25 users. New customers get half price for the first three months only, so budget on the list price. Unlimited invoices begin on Simple Start, with custom templates. The depth is the real product: full double-entry bookkeeping on every plan, over 20 reports on Simple Start, 40 on Essentials and 65 on Plus, an audit log and multi-currency from Essentials, and inventory tracking, project profitability and budgeting on Plus. Inventory tracking matters on install jobs, because equipment and parts sit in stock before they sit on an invoice, and project profitability ties the equipment cost, the parts and the labour back to one install. Accountant access is built in from the start: Simple Start lets you invite two accounting firms at no extra cost, and most accountants already run QuickBooks, so the handover is often a matter of granting access. Card payments cost 2.99 percent, and bank payments cost 1 percent with a 1 dollar minimum. The catch is the seat math. A partner or office manager who needs a sign-in moves you to Essentials at $85 a month, a fifth person means Plus at $140 a month, and a sixth user means the top plan at $340 a month, because extra seats are not sold on their own.
Wave: the free plan is real, and so are its edges
Wave is the only genuinely free starting point in this guide. The Starter plan costs nothing and includes unlimited invoices, estimates, bills and bookkeeping records, with no published cap on clients. A one-van HVAC tech can send every repair invoice, record every bill for parts, and keep a real set of books for zero dollars a month, and the only money Wave takes is the payment fee when a customer pays online.
The free plan edges are specific, and they are the edges an HVAC business feels first. Card payments cost 2.9 percent plus 60 cents per transaction, and that 60 cent fixed fee is double the FreshBooks fee, which bites hardest on small repair invoices. Bank payments cost 1 percent per transaction with a 1 dollar minimum, matching FreshBooks. Automatic reminders are not included on Starter, so you chase late payers yourself, and there is no automatic late fee feature on any Wave plan. Receipt capture is a paid add-on on Starter, not a built-in, and Wave has no mileage tracker. Wave Pro, at $19 a month or $190 a year, closes most of those gaps: automated reminders, automatic bank imports, and unlimited receipt capture, plus the first 10 card transactions each month at 2.9 percent and no fixed fee. Then there is the catch that ends the debate for some readers: Wave is only available to businesses based in the United States and Canada, and a trade business based anywhere else cannot open a Wave account at all.
What the payment fees do on 8,000 dollars of invoices
Plan prices are only part of the bill, because a fee lands on every paid invoice. Here is the fee cost of 8,000 dollars across 16 invoices in a month, with bank totals assuming every customer pays by bank transfer.
| Tool and plan | Fees if all 16 paid by card | Fees if all 16 paid by bank |
|---|---|---|
| FreshBooks, any plan | $236.80 | $80 |
| QuickBooks Online, any plan | $239.20 | $80 |
| Wave Starter | $241.60 | $80 |
| Wave Pro | $235.60 | $80 |
The fees sit close together: about 6 dollars a month apart at this volume from cheapest to dearest, a rounding error next to the plan prices. All three charge 1 percent for bank payments, so steering customers to bank transfer saves roughly 155 dollars a month here. One worked example, with the arithmetic shown: assume a solo HVAC tech collects 6,000 dollars a month across 15 card payments, on FreshBooks Plus billed yearly at about 38.70 dollars a month. The card fee is 2.9 percent of 6,000 dollars, which is 174 dollars, plus 30 cents times 15 payments, which is 4.50 dollars, giving 178.50 dollars. The real running cost is about 217.20 dollars a month, since 38.70 plus 178.50 equals 217.20. On bank payment the fee at 1 percent is 60 dollars, so the real running cost falls to about 98.70 dollars a month.
Which one fits a solo tech
Start with where the money leaks today. If invoices go out late and balances drift for weeks, FreshBooks Plus is the pick, because the reminders, scheduled late fees and recurring invoices do the chasing for you, and Plus at $43 a month, or about $38.70 billed yearly, gives 50 billable clients. Wave Starter is the pick when the budget is the binding limit and the business is based in the United States or Canada. Zero dollars a month buys unlimited invoicing and real bookkeeping, and the missing reminders only hurt once volume grows. QuickBooks Simple Start takes the solo case in two situations: an accountant who already runs your taxes inside QuickBooks, or a solo operator who wants full double-entry books from the first invoice and can live as the only user. At $38 a month it undercuts FreshBooks Plus by $5 a month, as long as nobody else needs a sign-in. Our HVAC invoicing guide puts that workflow beside the field service tools.
Which one fits a small crew with an office list
A small crew changes the question from chasing to capacity. The client list is longer, the office list is longer, and the books must hold both. FreshBooks Premium stays in the argument while the firm is invoicing-led. At $70 a month it removes the client cap and keeps the strongest chasing automation here, and one person running the office can honestly stay on FreshBooks. The moment a bookkeeper needs their own sign-in, or parts inventory and per-job profit reporting become weekly work, the balance tips away from FreshBooks, because FreshBooks prices the client list and QuickBooks prices the team. QuickBooks Plus is the crew pick when the books are shared work. At $140 a month it gives 5 users, project profitability, inventory tracking and budgeting, so the office can track equipment and parts against each install and see which jobs made money. Wave still works for a small crew that mostly needs clean books, but once a second van is on the road, the chasing automation is what you are buying. Our HVAC scheduling guide covers the diary side of that crew week.
Which one fits a business whose accountant already lives in QuickBooks
QuickBooks Online, usually without a long debate. When the accountant already runs the business taxes inside QuickBooks, the handover is a matter of granting access to a system the accountant already knows, with room for two accounting firms from Simple Start at $38 a month. That removes the most expensive week of the year, spent exporting and retyping a year of records that live in a different system. FreshBooks answers with accountant access from Plus upward, but it is not the system most accountants already run client books in. Ask your accountant which system they want the books in, and how they want the year end handover to work. If the answer is QuickBooks, buy QuickBooks, and pick the tier by the team: Simple Start at $38 a month for one user, Essentials at $85 for three, Plus at $140 for five, and the top plan at $340 for 25. If the accountant has no preference, the choice goes back to the leak: FreshBooks Plus for chasing, Wave Starter or Pro for a zero or low budget inside the United States or Canada. An accountant with a strong preference beats every feature table in this guide, so ask first and buy second.
Honest limits of this guide
- This guide is based on the vendors official pricing pages, checked on 1 November 2026, and our trial testing is still to come.
- These are accounting tools, not field service platforms. None of the three manages a job calendar, dispatch, routes or crew scheduling on the plans we checked.
- No yearly billed rate for FreshBooks Premium is stated in the sibling drafts, and the paid payments add-on price is also not stated, so neither is budgeted here.
- FreshBooks counts billable clients against your plan cap and QuickBooks counts your own users, so check the cap that binds your business before buying.
- Wave is available only in the United States and Canada. FreshBooks and QuickBooks sell more widely, but payment features vary by country.
Frequently asked questions
What is the best accounting software for an HVAC business?
It depends on which pain costs you most. FreshBooks Plus at 43 dollars a month is the strongest pick when unpaid job invoices are the leak, because reminders, late fees and recurring invoices run on every plan. QuickBooks Online is the strongest pick when the books themselves are the job, because full double-entry books and accountant access run from Simple Start at 38 dollars a month. Wave Starter is the strongest pick when the budget is zero and the business is based in the United States or Canada, because it is free.
How much does accounting software for an HVAC business cost?
Printed prices run from Wave Starter at zero dollars, through FreshBooks Lite at 23 dollars a month and QuickBooks Simple Start at 38 dollars a month, up to QuickBooks top plan at 340 dollars a month. The honest FreshBooks starting price is Plus at 43 dollars a month, or about 38.70 billed yearly. Payment fees sit on top: FreshBooks charges 2.9 percent plus 30 cents on cards, QuickBooks charges 2.99 percent on cards, and Wave charges 2.9 percent plus 60 cents on cards, and all three charge 1 percent on bank payments.
Can these tools handle recurring invoices for HVAC maintenance agreements?
FreshBooks handles them on every plan, because recurring invoices are included from Lite upward, so a maintenance agreement can be billed on a set timetable. QuickBooks and Wave do not name recurring invoices as a headline feature on the pages we checked, so how a repeat agreement is billed in each is a trial question.
Do these tools replace a field service platform for an HVAC business?
No. FreshBooks, QuickBooks Online and Wave are accounting tools, not field service platforms. None of them manages a job calendar, dispatch, routes or crew scheduling on the plans we checked. An HVAC business that needs the diary run beside the books needs a field service system too.
Prices verified on the official pricing pages of FreshBooks, QuickBooks Online and Wave on 1 November 2026. Standard list prices are used throughout, not introductory promotions.
Related reading: FreshBooks versus QuickBooks, FreshBooks versus Wave, HVAC invoicing guide, HVAC software roundup, and HVAC CRM guide.
