HVAC work bills in three different ways. A repair ends at the kitchen table, where the tech builds the invoice from a flat rate pricebook and the customer pays on the spot. A system replacement runs the other way: a deposit invoice before the equipment is ordered, progress invoices as the install moves, and a final invoice. And maintenance agreements bill quietly on a schedule.
This guide compares Housecall Pro, Jobber, FreshBooks, QuickBooks and Joist. We judged them on flat rate repair invoicing, deposit and progress billing, agreement billing, chasing late payments in the summer rush, the handoff to the books, and what the fees really cost.
How this guide was made: this comparison is built from each vendor official pricing and feature pages, checked on 31 October 2026, not from hands-on testing. Free trial walkthroughs are in progress, and trial notes and screenshots will be added here. Some links on this site are affiliate links, so we may earn a commission if you sign up, at no extra cost to you. That never changes a pick. Read our full affiliate disclosure.
Quick verdict
- Best overall for most HVAC companies: Housecall Pro Essentials. Flat rate pricing for repair invoices, at 149 dollars a month billed yearly for 5 users.
- Best for agreement billing: Housecall Pro MAX. Recurring Service Plans at 299 dollars a month billed yearly for 8 users.
- Best when invoicing is the whole job: FreshBooks Plus. Deposit invoices, retainers, reminders and scheduled late fees, at 43 dollars a month, about 38.70 billed yearly.
- Best budget starts: Joist Pro, Jobber Core. Joist at 17 dollars a month for a solo tech, Jobber Core at 29 dollars when the quote and schedule matter too.
The five tools at a glance
| Tool and plan | Cost | Flat rate invoicing | Deposits and progress billing | Agreement billing | Card fee / bank fee |
|---|---|---|---|---|---|
| Housecall Pro Essentials | 149 dollars a month billed yearly, 5 users | Yes, flat rate pricing | Not listed on its pricing page | On MAX only, Recurring Service Plans | From 2.59% / 1% |
| Jobber Core | 29 dollars a month billed yearly, 1 user | No pricebook, quotes with signature approval | Yes, in the quote to invoice flow | Recurring visits on standard plans | 2.9% + 30 cents / 1% |
| FreshBooks Plus | 43 dollars a month, about 38.70 billed yearly | No, line item invoices | Yes, deposits and retainers | Recurring invoices on every plan | 2.9% + 30 cents / 1% |
| QuickBooks Simple Start | 38 dollars a month | No | Not listed on its pricing page | Recurring invoices | 2.99% / 1% |
| Joist Pro | 17 dollars a month | No, estimate-led line items | Yes, deposits and milestone payments | Not listed | 3.49% + 49 cents / 1%, capped at 15 dollars |
Housecall Pro: flat rate invoicing at the kitchen table
Housecall Pro fits the HVAC company whose day is repair work. On Essentials the tech builds the invoice from the flat rate pricebook, each repair at a set figure approved on the spot. Essentials, at 149 dollars a month billed yearly for 5 users, is where the flat rate pricing sits. Basic, at 59 dollars for one user, lacks it, so budget for Essentials if you price from a book.
Agreement billing sits one tier higher: Recurring Service Plans, the packaged maintenance agreement, are on MAX only, at 299 dollars a month billed yearly for 8 users. The trial runs 14 days with no card required.
Best for: repair-led companies of 2 to 12 techs, and agreement-led companies willing to pay for MAX. Skip it if: staged install billing is your main pattern.
Jobber: the replacement job, billed in stages from one quote
Jobber fits the company whose money arrives on quoted work. A system replacement starts as a quote with signature approval, on every plan including Core, and deposit invoices sit inside the same quote to invoice flow, so the job bills in stages from one record. Core, at 29 dollars a month billed yearly for one user, covers quotes, scheduling, invoicing and payments, with online cards at 2.9 percent plus 30 cents.
The catch is the chasing. Automatic reminders and quote follow ups start on Connect at 99 dollars a month billed yearly, so hands-off invoicing on Jobber really means budgeting 99 dollars. There is no flat rate pricebook in the pages we checked.
Best for: small crews whose week runs on quotes and installs. Skip it if: flat rate repair billing is the core of your day.
FreshBooks: deposit invoices, retainers and chasing that runs itself
FreshBooks is the invoicing-first tool here, and its HVAC case is install paperwork. Deposit invoices and retainers sit on Plus and above: the first part of the job price billed up front, the balance as stages complete. An estimate converts into an invoice, and automatic reminders, scheduled late fees and recurring invoices run on every plan, so an agreement bills as a recurring invoice and a slow payer gets chased automatically.
The limits are the cap and the calendar. Lite, at 23 dollars, allows only 5 billable clients, passed in the first week of summer. Plus, at 43 dollars a month or about 38.70 billed yearly, raises the cap to 50, and Premium at 70 dollars removes it. There is no job scheduling and no pricebook.
Best for: the office-led company whose pain is deposits, stages and late payment. Skip it if: you need scheduling and invoicing in one system.
QuickBooks: the accounting handoff, handled
QuickBooks is the pick when the books matter more than the invoice itself. Simple Start, at 38 dollars a month, covers estimates, invoices and automatic reminders, and every invoice lands directly in the books your accountant already works from. The ladder runs Essentials 85 dollars, Plus 140 dollars, Advanced 340 dollars, list prices. Card payments on invoices cost 2.99 percent, the highest of the mainstream tools here, bank payments 1 percent with a 1 dollar minimum, and there is no automatic late fee feature, no dispatch and no job record.
Best for: companies whose accountant already runs the books there. Skip it if: you want one system from the service call to the invoice.
Joist: the cheapest document flow a solo tech can run
Joist is the contractor document tool, and the cheapest way to run the replacement pattern. Deposits and milestone payments are built into its estimate and invoice flow, so a changeout bills as deposit, rough-in and final invoices, and Elite at 32 dollars a month adds change orders. Basics, at 10 dollars, caps you at 5 documents a month, a ceiling a working tech passes in days. Pro, at 17 dollars, removes the cap and adds work orders and QuickBooks Online sync.
Two honest catches. Joist Payments charges 3.49 percent plus 49 cents on cards, the highest rate here, though its 1 percent bank fee is capped at 15 dollars per payment. And Joist is a single-user app with no automatic reminders listed on its pricing page, so the chasing is manual. There is no free plan, just a 14 day trial.
Best for: the solo tech living on estimates and staged invoices. Skip it if: your crew needs shared access, or your repair day runs on a flat rate book.
What the fees do on 30,000 dollars of invoices
The arithmetic on one busy month, assumptions up front: 60 invoices totalling 30,000 dollars, including two system replacements at 4,500 dollars each. Card totals assume every customer pays by card, bank totals assume bank transfer, and Housecall Pro is costed at its starting rate of 2.59 percent. This is arithmetic, not a vendor quote.
| Tool and plan | Plan cost | Fees if all paid by card | Total, card | Fees if all paid by bank | Total, bank |
|---|---|---|---|---|---|
| Housecall Pro Essentials | $149 | $777 | $926 | $300 | $449 |
| Jobber Core (yearly billing) | $29 | $888 | $917 | $300 | $329 |
| FreshBooks Plus | $43 | $888 | $931 | $300 | $343 |
| QuickBooks Simple Start | $38 | $897 | $935 | $300 | $338 |
| Joist Pro | $17 | $1,076.40 | $1,093.40 | $240 | $257 |
Two lessons. The card rate matters more than the plan price: the spread between the cheapest and dearest card month is about 176 dollars, and Joist pairs the cheapest plan with the dearest card total. Bank payments flip the table, thanks to that 15 dollar cap. The two replacement invoices alone cost 233.10 dollars in card fees on Housecall Pro at its starting rate, against 90 dollars by bank transfer.
Which one fits a solo tech
If your week is changeouts and quoted work, Joist Pro at 17 dollars is the natural home: estimates, deposits and milestone invoices are its core job, and its capped bank fee suits big tickets. If your week is service calls priced from a book, budget for Housecall Pro Essentials, where flat rate pricing sits. Jobber Core at 29 dollars is the middle path.
Which one fits a repair-led company of 3 to 6 techs
Housecall Pro Essentials, at 149 dollars for 5 users. The flat rate book is the repair day, the invoice closes the job, and its starting card rate is the lowest here. If the same company sells agreements hard, the honest step is MAX at 299 dollars for Recurring Service Plans.
Which one fits an install-led or office-led company
Install work runs on deposits, stages and chasing. FreshBooks Plus earns its 43 dollars on deposit invoices, retainers and self-running reminders, and Premium at 70 dollars removes the client cap. Jobber is the alternative when quote, schedule and invoice must live in one record, with Connect at 99 dollars the real budget once reminders matter. Put replacement customers on bank payments: the fee gap beats any plan saving.
Honest limits of this guide
- Based on official vendor pricing and feature pages checked on 31 October 2026. Trial walkthroughs are still in progress, and hands-on notes will be added when they are done.
- Housecall Pro card rate is a starting rate, from 2.59 percent, so the fee table uses that rate. Your actual rate can differ.
- Joist payment rates come from the fee guide on its own site, checked the same day, not from its pricing page.
- FreshBooks counts billable clients against your plan cap, so check the 5 client Lite cap and the 50 client Plus cap against your own list.
- Prices are standard list prices, not introductory promotions, and they change often, so recheck the vendor page before you commit.
- Payment approval is not automatic. Each tool runs identity and business checks before you can take payments.
Frequently asked questions
Can an HVAC company bill a deposit, progress payments and a final balance on a system replacement?
Yes: a deposit invoice before work starts, progress invoices as stages complete, and a final invoice for the balance, all on one job price. Jobber builds deposit invoices into its quote to invoice flow, Joist builds in deposits and milestone payments, and FreshBooks supports deposit invoices and retainers on Plus and above.
Which software is best for flat rate repair invoicing?
Housecall Pro. Its flat rate pricing sits on Essentials at 149 dollars a month billed yearly for 5 users, so the tech builds the repair invoice from the pricebook at the kitchen table and the customer approves one set figure. Jobber has quotes with signature approval on every plan, but no flat rate pricebook in the pages we checked.
How are maintenance agreements billed?
On Housecall Pro, packaged agreements are its Recurring Service Plans, on MAX at 299 dollars a month billed yearly for 8 users, so agreement billing runs on a schedule. The alternative is FreshBooks, where recurring invoices run on every plan, though the agreement is a recurring invoice rather than a named plan product.
How much do payment fees cost an HVAC company each month?
On 30,000 dollars of invoices across 60 jobs, card fees run from 777 dollars with Housecall Pro at its starting rate to 1,076.40 dollars with Joist. Bank payments cost 300 dollars or less on every tool here, and Joist caps its bank fee at 15 dollars per payment, bringing its bank total to 240 dollars.
Prices and payment fees verified on vendor official pages on 31 October 2026. Standard list prices are used throughout, not introductory promotions.
Related reading: our best software for HVAC companies guide judges the full platforms, our Housecall Pro pricing breakdown prices every tier, and the HVAC software hub collects the rest.
